Protection film
Is the leading professional manufacturer of surface protection materials in China.Our products including Protection film, PE film and Protective film.
Your position: Protection film > News > Film Technology

How to post the new protection film?

1. Wash hands, dry

2. With the flannel side of the screen to completely wipe

3. Use has not been removed to the new film on the screen is a gauge to determine membrane under the margin to determine the most suitable position (this step is relatively  protection film is superfluous,  protective film are the supporting membrane, no cut)

4. With the clear plastic of the sticky side of that stick again lightly loaded screen to ensure that no particles of dust and small hair, this step can be formal if there is a need to do it again before the foil

5. Tear the new film, not all ripped, and open about 1.5cm or so on it

6. On film! Beginning of the very hub of much larger margin film paste easily distorted, at the beginning can only be re-posted Debu posted directly. Film location whether it is, the length of this first 1cm regular hub.

7. The rest of the film edge tear, edge card with a hard push in the outer membrane. Ensure that no air bubbles remain in the film's central. Bubble formation, there are two reasons, first, the poor quality of film is not smooth (very rare), and second, the screen or the film's veneer with small hair and dust (much to paste the screen finished films are due after the appalling second reason)

8. Slow and patient may gradually paste Zhang membrane integrity, the edge of some of the small bubble needs to go before we can remove the hard launch

Come from:

Home | About Us | Products | Protection film technology | Guest Book | Contact Us | Privacy | Sitemap | Chinese
© 2010 Guangdong Tamay New Materials Co.,Ltd. Powered by Link: Padlocks Metal spinning
Friend link: Dinner Sofa Fastener buyer Silicon model